產品特點
ETS-Lindgrens FACT™ 25 CISPR Chambers offer semi-anechoic radiated emissions (RE) compliance testing over a frequency range of 70 MHz to 18 GHz. The chamber is used for vehicle component level testing in accordance with CISPR 25.
Description
The FACT™ 25 CISPR chambers performance is achieved by lining the walls and ceiling with extra high performance (EHP) EHP-36PCL, 36 inch, pyramidal absorber material. The chamber is constructed using our Series 81TM modular shielding system.
Standard Configuration
- One threaded brass ground stud 1.27 cm (0.5") diameter x 12.7 cm (5") long ◾One single-leaf, Series 201, recessed contact mechanism (RCM), manually operated, RF-shielded door, 1.2 m x 2.13 m (4 x 7) high
- Installation of the enclosure and absorber
- Guaranteed performance and a five-year limited warranty; one-year warranty on doors, filters and moving parts; two year warranty on optional ETS-Lindgrens equipment
- Design and fabricate RF-shielded enclosure, interior nominal shield-to-shield dimensions of 7 m L x 7 m W x 4.3 m H, (23 L x 22 W x 14 H) includes 30 cm (12") raised floor
- Two connector panels, (6" x 24")
- Two waveguide vents, 30.48 cm x 30.48 cm (12 x 12) in the ceiling
- 3.18 mm (1/8") thick dielectric floor underlay
- Six mil polyethylene vapor barrier
- EHP-36PCL, 36", pyramidal absorber on all wall and ceiling surfaces
- Shield test per MIL-STD-285, one frequency test at 1 GHz
- One door maintenance kit
- 3.18 mm (1/8") vinyl floor tile
- Four incandescent corner mounted light fixtures with incandescent floodlights (electrical distribution not included)
- Two UL-listed 2 x 30 amp, 60 Hz power-line filters (wiring and electrical distribution not included)
Options
- Fire detection and suppression system
- Intercom system
- Electrical distribution
- Field uniformity measurement up to 18 GHz
- CCTV monitoring system
- Other door options available
- Normalized Site Attenuation measurement up to 18 GHz
- Shielded control room 3.05 m x 3.05 m x 2.44 (10 x 10 x 8)
- Ferrite tile mounted on rolling carts
- Seismic structural design calculations and certification
- Low profile door sill for Series 201 door
