用途 Usage
欲改善馬達溫昇過高、轉矩不足、振動較大、噪音較高等問題；或對齒輪強度不足、精度不佳、減速機會漏油等問題困擾的場合皆適用
For solving increasing temperature, absent torque, high vibration, loud noise; or usage in occasion for weak strength of gear, low precision, oil-spill problem.
特徵Characteristic
1.散熱效果佳
Good dissipate heat effect
2.防油/防水/防塵(IP54)
Oilproof/Waterproof/dustproof(IP54)
3.結構強度提昇2倍
Upgrade structure to double intensity
4.減速機最大容許轉矩可達40Nm
Maximum permissible torque of Gearhead is up to 40Nm
各系列特徵 Characteristic of series
交流感應馬達AC Induction Motor
單一方向連續運轉，連續定格，過轉量約30~40回轉。
Continuing rotate at one direction, Stop motion continuously, About 2~3 over rotation as stopping
可逆馬達AC Reversible Motor
頻繁正逆轉及瞬間啟動、停止用，30分鐘定格，過轉量約4~6回轉。
frequent rotate clockwise and counterclockwise, instantaneous start or stop, stop motion every 30 minute, about 4~6 over rotation as stopping
速度控制馬達Speed Control Motor
速度調整範90-1700r/min(60Hz)/90-1400r/min(50Hz)，過轉量約0.5~1回轉，可於面板設定速度、剎車、緩慢起動停止、電子減速比。
Speed control range: 90-1700r/min(60Hz)/90-1400r/min(50Hz). About 0.5~1 over rotation as stopping, Easily Control speed, instantaneous brake stop, Slow start or stop, Electro-gear ratio setting on panel.
電磁剎車馬達Electromagnetic Brake Motor
停電時具有保持力矩，剎車頻度50次/分鐘以下，過轉量約2~3回轉
During power outage, there is still torque maintenance. Brake frequency is below 50 times in a minute. About 2~3 over rotation as stopping.
轉矩馬達Torque Motor
張力控制用，五分鐘定格，垂下特性，常用於收放料
For tension controlling, stop-motion for continuous/5 minutes, drooping characteristics, often use in Feeding and discharging occasion
|
